Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (12) PDF

5) Remove shut valve from fuel filler pipe.
B2M1797
6) Install in the reverse order of removal.
Tightening torque:
4.4
1.5 Nm (0.45
0.15 kg-m, 3.3
1.1 ft-lb)
B2M1797
13. Drain Valve
A: REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
G6M0095
2) Lift-up the vehicle.
3) Remove canister. <Ref. to 2-1 [W3A0].>
B2M1780
4) Disconnect connector from drain valve.
H2M3611
5) Disconnect evaporation hoses from drain valve.
H2M3612
17
[W13A0] 2-1SERVICE PROCEDURE
13. Drain Valve

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (12) Summary of Content

5) Remove shut valve from fuel filler pipe.B2M17976) Install in the reverse order of removal.Tightening torque:4.41.5 Nm (0.450.15 kg-m, 3.31.1 ft-lb)B2M179713. Drain ValveA: REMOVAL AND INSTALLATION1) Disconnect battery ground cable.G6M00952) Lift-up the vehicle.3) Remove canister. Ref. to 2-1 [W3A0].B2M17804) Disconnect connector from drain valve.H2M36115) Disconnect evaporation hoses from drain valve.H2M361217[W13A0] 2-1SERVICE PROCEDURE13. Drain Valve