Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (3) PDF

3. Canister
A: REMOVAL AND INSTALLATION
1) Lift-up the vehicle.
2) Disconnect evaporation hoses from canister.
S2M0950
3) Remove canister from body.
S2M0142
4) Install in the reverse order of removal.
Tightening torque:
22.5
7 Nm (2.3
0.7 kg-m, 16.6
5.1 ft-lb)
S2M0142
4. Purge Control Solenoid
Valve
A: REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
G6M0095
2) Remove air cleaner case and air intake duct.
<Ref. to 2-7 [W1A0].>
H2M2929
3) Remove bolt which installs purge control sole-
noid valve to intake manifold.
S2M0055
5
[W4A0] 2-1SERVICE PROCEDURE
4. Purge Control Solenoid Valve

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (3) Summary of Content

3. CanisterA: REMOVAL AND INSTALLATION1) Lift-up the vehicle.2) Disconnect evaporation hoses from canister.S2M09503) Remove canister from body.S2M01424) Install in the reverse order of removal.Tightening torque:22.57 Nm (2.30.7 kg-m, 16.65.1 ft-lb)S2M01424. Purge Control SolenoidValveA: REMOVAL AND INSTALLATION1) Disconnect battery ground cable.G6M00952) Remove air cleaner case and air intake duct.Ref. to 2-7 [W1A0].H2M29293) Remove bolt which installs purge control sole-noid valve to intake manifold.S2M00555[W4A0] 2-1SERVICE PROCEDURE4. Purge Control Solenoid Valve