Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (5) PDF

B: INSTALLATION
CAUTION:
Leave fuel filler cap open when tightening nuts,
to prevent fuel from flowing out through fuel
delivery and return pipes. Close fuel filler cap
after tightening nuts.
Install in the reverse order of removal. Do the fol-
lowing:
(1) Always use new gaskets.
(2) Ensure sealing portion is free from fuel or for-
eign particles before installation.
(3) Tighten nuts in alphabetical sequence shown
in figure to specified torque.
Tightening torque:
4.4
1.5 Nm (0.45
0.15 kg-m, 3.3
1.1 ft-lb)
S2M0063A
(4) Connect connector to fuel pump relay.
S2M0093
6. Fuel Tank Pressure Sensor
A: REMOVAL AND INSTALLATION
1) Remove fuel tank. <Ref. to 2-8 [W2A0].>
S2M0169A
2) Remove protector cover.
H2M3601
3) Disconnect connector from fuel tank pressure
sensor.
H2M3603
4) Release clips which hold fuel pipes onto fuel
tank.
H2M3604
8
2-1 [W5B0] SERVICE PROCEDURE
6. Fuel Tank Pressure Sensor

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (5) Summary of Content

B: INSTALLATIONCAUTION:Leave fuel filler cap open when tightening nuts,to prevent fuel from flowing out through fueldelivery and return pipes. Close fuel filler capafter tightening nuts.Install in the reverse order of removal. Do the fol-lowing:(1) Always use new gaskets.(2) Ensure sealing portion is free from fuel or for-eign particles before installation.(3) Tighten nuts in alphabetical sequence shownin figure to specified torque.Tightening torque:4.41.5 Nm (0.450.15 kg-m, 3.31.1 ft-lb)S2M0063A(4) Connect connector to fuel pump relay.S2M00936. Fuel Tank Pressure SensorA: REMOVAL AND INSTALLATION1) Remove fuel tank. Ref. to 2-8 [W2A0].S2M0169A2) Remove protector cover.H2M36013) Disconnect connector from fuel tank pressuresensor.H2M36034) Release clips which hold fuel pipes onto fueltank.H2M360482-1 [W5B0] SERVICE PROCEDURE6. Fuel Tank Pressure Sensor