Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (6) PDF

5) Move the two fuel pipes to upper side, and
remove bolt which install fuel tank pressure sensor
to bracket.
H2M3602
6) Move clip, and disconnect pressure hose from
fuel tank.
7) Disconnect pressure hose from fuel tank pres-
sure sensor.
B2M1779
8) Install in the reverse order of removal.
Tightening torque:
7.35
1.96 Nm (0.75
0.20 kg-m, 5.4
1.4
ft-lb)
H2M3602
7. Pressure Control Solenoid
Valve
A: REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
G6M0095
2) Remove canister. <Ref. to 2-1 [W3A0].>
B2M1780
3) Disconnect evaporation hoses (A) from joint
pipes.
S2M0876A
9
[W7A0] 2-1SERVICE PROCEDURE
7. Pressure Control Solenoid Valve

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (6) Summary of Content

5) Move the two fuel pipes to upper side, andremove bolt which install fuel tank pressure sensorto bracket.H2M36026) Move clip, and disconnect pressure hose fromfuel tank.7) Disconnect pressure hose from fuel tank pres-sure sensor.B2M17798) Install in the reverse order of removal.Tightening torque:7.351.96 Nm (0.750.20 kg-m, 5.41.4ft-lb)H2M36027. Pressure Control SolenoidValveA: REMOVAL AND INSTALLATION1) Disconnect battery ground cable.G6M00952) Remove canister. Ref. to 2-1 [W3A0].B2M17803) Disconnect evaporation hoses (A) from jointpipes.S2M0876A9[W7A0] 2-1SERVICE PROCEDURE7. Pressure Control Solenoid Valve