Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (8) PDF

9. Drain Filter
A: REMOVAL AND INSTALLATION
1) Disconnect battery ground cable.
G6M0095
2) Lift-up the vehicle.
3) Remove canister. <Ref. to 2-1 [W3A0].>
B2M1780
4) Disconnect connector from drain valve.
H2M3611
5) Disconnect evaporation hoses (A) from joint
pipes.
S2M0876A
6) Remove nut which installs drain filter and drain
valve brackets on body, and remove them as a
unit.
H2M3611
7) Disconnect evaporation hoses, and remove
drain filter.
B2M1791
8) Install in the reverse order of removal.
Tightening torque:
22.5
7 Nm (2.3
0.7 kg-m, 16.6
5.1 ft-lb)
H2M3611
13
[W9A0] 2-1SERVICE PROCEDURE
9. Drain Filter

Subaru Forester Emission Control System and Vacuum Fitting 1999 2000 (8) Summary of Content

9. Drain FilterA: REMOVAL AND INSTALLATION1) Disconnect battery ground cable.G6M00952) Lift-up the vehicle.3) Remove canister. Ref. to 2-1 [W3A0].B2M17804) Disconnect connector from drain valve.H2M36115) Disconnect evaporation hoses (A) from jointpipes.S2M0876A6) Remove nut which installs drain filter and drainvalve brackets on body, and remove them as aunit.H2M36117) Disconnect evaporation hoses, and removedrain filter.B2M17918) Install in the reverse order of removal.Tightening torque:22.57 Nm (2.30.7 kg-m, 16.65.1 ft-lb)H2M361113[W9A0] 2-1SERVICE PROCEDURE9. Drain Filter