5. Radiator Main Fan and Fan
Motor
A: REMOVAL AND INSTALLATION
1) Set the vehicle on the lift.
2) Disconnect battery ground cable.
G6M0095
3) Lift-up the vehicle.
4) Remove under cover.
5) Disconnect connector of main fan motor.
S2M0591
6) Detach ATF cooler hose attached to a clip
under the radiator main fan shroud. (AT vehicles
only)
H2M3592
7) Lower the vehicle.
8) Remove V-belt covers.
S2M0896
9) Disconnect over flow hose.
S2M0930
10) Remove reservoir tank.
S2M0931
11) Remove radiator main fan motor assembly.
S2M0929
17
[W5A0] 2-5SERVICE PROCEDURE
5. Radiator Main Fan and Fan Motor