Subaru Forester Engine Cooling System 1999 2000 (17) PDF

4) Install in the reverse order of removal.
Tightening torque:
4.9
1.5 Nm (0.50
0.15 kg-m, 3.6
1.1 ft-lb)
S2M0934
9. Engine Coolant
A: DRAINING OF ENGINE
COOLANT
WARNING:
The radiator is pressurized. Wait until engine
cools down before working on the radiator.
1) Lift-up the vehicle.
2) Remove under cover.
3) Fit vinyl tube to drain pipe.
H2M2927B
(A) Drain pipe
(B) Vinyl tube
(C) Drain cock
4) Loosen drain cock to drain engine coolant into
container.
NOTE:
Remove radiator cap so that engine coolant will
drain faster.
B2M0015
23
[W9A0] 2-5SERVICE PROCEDURE
9. Engine Coolant

Subaru Forester Engine Cooling System 1999 2000 (17) Summary of Content

4) Install in the reverse order of removal.Tightening torque:4.91.5 Nm (0.500.15 kg-m, 3.61.1 ft-lb)S2M09349. Engine CoolantA: DRAINING OF ENGINECOOLANTWARNING:The radiator is pressurized. Wait until enginecools down before working on the radiator.1) Lift-up the vehicle.2) Remove under cover.3) Fit vinyl tube to drain pipe.H2M2927B(A) Drain pipe(B) Vinyl tube(C) Drain cock4) Loosen drain cock to drain engine coolant intocontainer.NOTE:Remove radiator cap so that engine coolant willdrain faster.B2M001523[W9A0] 2-5SERVICE PROCEDURE9. Engine Coolant