Subaru Forester Engine Cooling System 1999 2000 (9) PDF

1. Water Pump
A: REMOVAL
WARNING:
The radiator is pressurized. Wait until engine
cools down before working on the radiator.
1) Set the vehicle on the lift.
2) Disconnect ground cable from the battery.
G6M0095
3) Lift-up the vehicle.
4) Remove under cover.
5) Drain engine coolant completely.
<Ref. to 2-5 [W9A0].>
B2M0015
6) Disconnect connectors from radiator main fan
and sub fan motors.
S2M0893
7) Detach ATF cooler hose attached to a clip
under the radiator main fan shroud. (AT vehicles
only)
H2M3592
8) Remove bolt which installs water by-pass pipe
of oil cooler onto oil pump. (AT vehicles only)
S2M0027
9) Disconnect radiator outlet hose (A) and heater
hose (B) from water pump.
10) Disconnect water by-pass hose (C). (AT
vehicles only)
S2M0015A
11) Lower the vehicle.
6
2-5 [W1A0] SERVICE PROCEDURE
1. Water Pump

Subaru Forester Engine Cooling System 1999 2000 (9) Summary of Content

1. Water PumpA: REMOVALWARNING:The radiator is pressurized. Wait until enginecools down before working on the radiator.1) Set the vehicle on the lift.2) Disconnect ground cable from the battery.G6M00953) Lift-up the vehicle.4) Remove under cover.5) Drain engine coolant completely.Ref. to 2-5 [W9A0].B2M00156) Disconnect connectors from radiator main fanand sub fan motors.S2M08937) Detach ATF cooler hose attached to a clipunder the radiator main fan shroud. (AT vehiclesonly)H2M35928) Remove bolt which installs water by-pass pipeof oil cooler onto oil pump. (AT vehicles only)S2M00279) Disconnect radiator outlet hose (A) and heaterhose (B) from water pump.10) Disconnect water by-pass hose (C). (ATvehicles only)S2M0015A11) Lower the vehicle.62-5 [W1A0] SERVICE PROCEDURE1. Water Pump