Subaru Forester Engine Lubrication System 1999 2000 (3) PDF

1. Oil Pump
A: REMOVAL
1) Set the vehicle on the lift.
2) Disconnect battery ground cable.
G6M0095
3) Lift-up the vehicle.
4) Remove under cover.
5) Drain coolant. <Ref. to 2-5 [W1A0].>
B2M0015
6) Remove bolts which install water pipe of oil
cooler to oil pump. (AT vehicles only)
S2M0027
7) Remove water pipe and hoses between oil
cooler and water pump. (AT vehicles only)
S2M0112
8) Lower the vehicle.
9) Remove radiator. <Ref. to 2-5 [W3A0].>
S2M0033
10) Remove crankshaft position sensor.
B2M1252
11) Remove camshaft position sensor. <Ref. to
2-7 [W10A0].>
B2M2317
5
[W1A0] 2-4SERVICE PROCEDURE
1. Oil Pump

Subaru Forester Engine Lubrication System 1999 2000 (3) Summary of Content

1. Oil PumpA: REMOVAL1) Set the vehicle on the lift.2) Disconnect battery ground cable.G6M00953) Lift-up the vehicle.4) Remove under cover.5) Drain coolant. Ref. to 2-5 [W1A0].B2M00156) Remove bolts which install water pipe of oilcooler to oil pump. (AT vehicles only)S2M00277) Remove water pipe and hoses between oilcooler and water pump. (AT vehicles only)S2M01128) Lower the vehicle.9) Remove radiator. Ref. to 2-5 [W3A0].S2M003310) Remove crankshaft position sensor.B2M125211) Remove camshaft position sensor. Ref. to2-7 [W10A0].B2M23175[W1A0] 2-4SERVICE PROCEDURE1. Oil Pump