Subaru Forester Engine Lubrication System 1999 2000 (5) PDF

3. Oil Pressure Switch
A: REMOVAL
1) Remove alternator from bracket.
(1) Disconnect connector and terminal from
generator.
S2M0941
(2) Remove V-belt cover.
S2M0896
(3) Loosen lock bolt and slider bolt, and remove
front side V-belt.
(4) Remove bolts which install generator on
bracket.
S2M0942
2) Disconnect terminal from oil pressure switch.
G2M0091
3) Remove oil pressure switch.
S2M0119
B: INSTALLATION
1) Apply fluid packing to oil pressure switch
threads before installation.
Fluid packing:
THREE BOND 1215 or equivalent
S2M0124B
14
2-4 [W3A0] SERVICE PROCEDURE
3. Oil Pressure Switch

Subaru Forester Engine Lubrication System 1999 2000 (5) Summary of Content

3. Oil Pressure SwitchA: REMOVAL1) Remove alternator from bracket.(1) Disconnect connector and terminal fromgenerator.S2M0941(2) Remove V-belt cover.S2M0896(3) Loosen lock bolt and slider bolt, and removefront side V-belt.(4) Remove bolts which install generator onbracket.S2M09422) Disconnect terminal from oil pressure switch.G2M00913) Remove oil pressure switch.S2M0119B: INSTALLATION1) Apply fluid packing to oil pressure switchthreads before installation.Fluid packing:THREE BOND 1215 or equivalentS2M0124B142-4 [W3A0] SERVICE PROCEDURE3. Oil Pressure Switch