PS-30
POWER ASSISTED SYSTEM (POWER STEERING)
TILT STEERING COLUMN
4. Tilt Steering Column
A: REMOVAL
1) Set the vehicle on the lift.
2) Disconnect battery minus terminal.
3) Remove airbag module. <Ref. to AB-12, RE-
MOVAL, Driver's Airbag Module.>
WARNING:
Always refer to ?Air Bag System? before per-
forming airbag module service. <Ref. to AB-12,
CAUTION, Driver's Airbag Module.>
4) Remove steering wheel. <Ref. to PS-27, RE-
MOVAL, Steering Wheel.>
5) Remove universal joint. <Ref. to PS-28, RE-
MOVAL, Universal Joint.>
6) Remove trim panel under instrument panel.
ST0023
(1) Tilt steering column
Tightening torque: Nm (kgf-m, ft-lb)
(2) Universal joint
T1: 24 (2.4, 17.4)
T2: 25 (2.5, 18.1)