Suzuki Aerio RH 2006 Series Service Repair Manual PDF

IMPORTANT
WARNING/CAUTION/NOTE
Please read this manual and follow its instructions carefully. To emphasize special information, the words
WARNING, CAUTION and NOTE have special meanings. Pay special attention to the messages highlighted by
these signal words.
WARNING:
Indicates a potential hazard that could result in death or injury.
CAUTION:
Indicates a potential hazard that could result in vehicle damage.
NOTE:
Indicates special information to make maintenance easier or instructions clearer.
WARNING:
This service manual is intended for authorized Suzuki dealers and qualified service mechanics only.
Inexperienced mechanics or mechanics without the proper tools and equipment may not be able to
properly perform the services described in this manual.
Improper repair may result in injury to the mechanic and may render the vehicle unsafe for the driver
and passengers.
WARNING:
For vehicles equipped with a Supplemental Restraint (Air Bag) System:
•Service on and around the air bag system components or wiring must be performed only by an
authorized SUZUKI dealer. Refer to “Air Bag System Components and Wiring Location View” under
“General Description” in air bag system section in order to confirm whether you are performing ser-
vice on or near the air bag system components or wiring. Please observe all WARNINGS and “Ser-
vice Precautions” under “On-Vehicle Service” in air bag system section before performing service
on or around the air bag system components or wiring. Failure to follow WARNINGS could result in
unintentional activation of the system or could render the system inoperative. Either of these two
conditions may result in severe injury.
•If the air bag system and another vehicle system both need repair, Suzuki recommends that the air
bag system be repaired first, to help avoid unintended air bag system activation.
•Do not modify the steering wheel, instrument panel or any other air bag system component (on or
around air bag system components or wiring). Modifications can adversely affect air bag system
performance and lead to injury.
•If the vehicle will be exposed to temperatures over 93°C (200°F) (for example, during a paint baking
process), remove the air bag system components (air bag (inflator) modules, SDM and/or seat belt
with pretensioner) beforehand to avoid component damage or unintended activation.

Summary of Content

IMPORTANTWARNING/CAUTION/NOTEPlease read this manual and follow its instructions carefully. To emphasize special information, the wordsWARNING, CAUTION and NOTE have special meanings. Pay special attention to the messages highlighted bythese signal words.WARNING:Indicates a potential hazard that could result in death or injury.CAUTION:Indicates a potential hazard that could result in vehicle damage.NOTE:Indicates special information to make maintenance easier or instructions clearer.WARNING:This service manual is intended for authorized Suzuki dealers and qualified service mechanics only.Inexperienced mechanics or mechanics without the proper tools and equipment may not be able toproperly perform the services described in this manual.Improper repair may result in injury to the mechanic and may render the vehicle unsafe for the driverand passengers.WARNING:For vehicles equipped with a Supplemental Restraint (Air Bag) System:Service on and around the air bag system components or wiring must be performed only by anauthorized SUZUKI dealer. Refer to Air Bag System Components and Wiring Location View underGeneral Description in air bag system section in order to confirm whether you are performing ser-vice on or near the air bag system components or wiring. Please observe all WARNINGS and Ser-vice Precautions under On-Vehicle Service in air bag system section before performing serviceon or around the air bag system components or wiring. Failure to follow WARNINGS could result inunintentional activation of the system or could render the system inoperative. Either of these twoconditions may result in severe injury.If the air bag system and another vehicle system both need repair, Suzuki recommends that the airbag system be repaired first, to help avoid unintended air bag system activation.Do not modify the steering wheel, instrument panel or any other air bag system component (on oraround air bag system components or wiring). Modifications can adversely affect air bag systemperformance and lead to injury.If the vehicle will be exposed to temperatures over 93C (200F) (for example, during a paint bakingprocess), remove the air bag system components (air bag (inflator) modules, SDM and/or seat beltwith pretensioner) beforehand to avoid component damage or unintended activation.