Toyota Sienna 2002 Factory Service Manual PDF | Page 2

BO23Z-01
H02639
H02352
: 11 Clips
H02351
: 3 Clips
H02350
: 5 Clips
-BODY REAR WIPER AND WASHER
BO-45
1722Author!: Date!:
2001 SIENNA (RM787U)
INSTALLATION
1. INSTALL WASHER NOZZLE
2. INSTALL WIPER MOTOR AND LINK ASSEMBLY
(a) Install the grommet.
(b) Install the wiper motor and link assembly with 5 bolts.
Torque: 5.4 N·m (55 kgf·cm, 48 in.·lbf)
(c) Connect the connector.
3. INSTALL BACK DOOR TRIM BOARD
Install the door trim board to the back door panel.
4. INSTALL SIDE GARNISH
(a) Install the side garnish to the back door panel.
(b) Employ the same manner described above to the other
side.
5. INSTALL CENTER GARNISH
Install the center garnish to the back door panel.

Toyota Sienna 2002 Factory Service Manual Summary of Content

BO23Z-01H02639H02352: 11 ClipsH02351: 3 ClipsH02350: 5 Clips-BODY REAR WIPER AND WASHERBO-451722Author!: Date!:2001 SIENNA (RM787U)INSTALLATION1. INSTALL WASHER NOZZLE2. INSTALL WIPER MOTOR AND LINK ASSEMBLY(a) Install the grommet.(b) Install the wiper motor and link assembly with 5 bolts.Torque: 5.4 Nm (55 kgfcm, 48 in.lbf)(c) Connect the connector.3. INSTALL BACK DOOR TRIM BOARDInstall the door trim board to the back door panel.4. INSTALL SIDE GARNISH(a) Install the side garnish to the back door panel.(b) Employ the same manner described above to the otherside.5. INSTALL CENTER GARNISHInstall the center garnish to the back door panel.